Running05/09/2027Naseby, United Kingdom

Shires and Spires.

The 10K at Shires and Spires is the one road-only course of the day out of Naseby Village Hall: a loop that drops from the village into a valley and then makes you earn the finish on the climb back up. In 2027 it runs anti-clockwise, as it does in every odd year.

Date05/09/2027
LocationNaseby, United Kingdom
Distance10k
Elevation Gain+135 m
ProfileRolling
Route ShapeLoop
Course & Elevation

Shires and Spires 2027: Course, Route Profile & Map

Start and finish are at Naseby Village Hall, which is also the highest point of the loop. The first half loses height gradually on country roads, around 85 m over a little more than five kilometres, with the low point coming just past halfway. The only water stop sits right there at 5 km, before the work begins.

From about km 5.9 the road climbs for 800 m at close to 7 % on average, with one stretch into double figures. A shorter, gentler rise follows around km 7.1, and the last section back into Naseby still trends uphill. The organiser calls the course challenging and undulating, and its shape explains why: every metre of height you give away on the way out is paid back in the last four kilometres.

Because the direction alternates every year, the 2027 edition is a different race from the clockwise even-year ones: this time the valley descent comes first and the climb comes last. The longer courses of the day use the same climb for their own run-in.

Start / finish · Water · Naseby
Elevation profileHover over the chart
Ascent+135 m
Descent−135 m
Vert/km13.6
Highest Point197 m
Lowest point113 m
Slope Distribution
Flat (<2%)46.7 %
Moderate Up (2-6%)20.1 %
Steep Up (>6%)5 %
Moderate Down (2-6%)23.9 %
Steep Down (>6%)4.3 %
Climbs on Route
StartLengthØMax.GainCat.
km 5.90.8 km6.8 %13.6 %+54 m—
km 7.10.4 km5.4 %7 %+23 m—

Climb categories follow the road-cycling convention and rate the terrain itself (length and gradient) regardless of sport: Cat. 4 marks the easiest rated climbs, Cat. 1 the hardest, and HC (hors catégorie, “beyond categorization”) is reserved for the most brutal ascents. Short climbs below the Cat. 4 threshold stay unrated.

Pacing Strategy

How to pace Shires and Spires.

Start

Start under control

Split this race in two. The first five kilometres mostly lose height, and it is tempting to let the gradient pull you into a pace your legs cannot hold once the road turns upward. Run the descent relaxed and a touch slower than it feels you could, and use the water at 5 km to reset.

Mid-race

Hold your rhythm

The race is decided on the 800 m climb from around km 5.9. Shorten your stride on the steep stretch and run by effort, not pace: your watch will show a big drop, and that is expected. A short breather follows before the second rise around km 7.1, and that gap is where you recover enough to push the final stretch into Naseby.

Finish

Spend what is left

The trap is treating the climb as the finish. The road keeps rising afterwards, and a runner who empties everything on the steepest section loses more time on the run-in than they gained on the hill.

Training plan · 12 weeks

Training plan for Shires and Spires: 12-week build

Base

Build the base

The demand is a hard, sustained effort close to your 10 km race intensity, but not an even one: a long, gently falling first half, then a climb that pulls you well above threshold for a few minutes, and a finish where you have to run fast again on tired legs.

Core

Train race pace

Train the second half above all. Hill repeats of three to four minutes at a strong but controlled effort mirror the main climb. Finish some of them with a few minutes of brisk running on the flat, so you learn to change gear again after the top. A progression run on a loop that ends uphill is the most specific single session for this course.

Specific

Rehearse the course

The opening descent deserves practice too. Run downhill sections relaxed and with a quick cadence so they cost your quads little, because the climb arrives soon after the low point.

Race week

Arrive fresh

This is a road race in early May in rural Northamptonshire. With only one water point at 5 km, it pays to practise drinking on the move without losing your rhythm.

GPX
Courses

Download the Shires and Spires course as a GPX file for your watch or bike computer.

Import into
Adaptive race preparation

Let YOUB adapt your plan for Shires and Spires dynamically

Ben connects your goal, the course, current load, recovery, and calendar. Your plan stays pointed at race day even when real life is not perfectly plannable.

FAQ

Everything about Shires and Spires.

How long is Shires and Spires?

Shires and Spires is 10 km long. That distance shapes how much aerobic endurance, pace durability, and race-specific work belong in the training plan.

How much elevation gain does Shires and Spires have?

Shires and Spires has around 135 m of elevation gain over 10 km. That affects pacing, muscular load, and preparation for late-race sections.

What is the route profile of Shires and Spires?

Shires and Spires is classified as Rolling, averaging 13.6 vertical metres per kilometre. 47% of the route is flat, 20% climbs moderately (2 to 6%) and 5% is steeper than 6%.

What climbs does Shires and Spires have?

The hardest climb of Shires and Spires starts at kilometre 5.9, runs for 0.8 km at an average of 6.8% and gains 54 metres. 2 climbs are mapped in total.

Is Shires and Spires a loop course?

Yes, Shires and Spires is laid out as a loop: start and finish are in the same place.

Is there a GPX file for the Shires and Spires course?

Yes. The Shires and Spires course is on this page as a free GPX download — ready to import into Garmin, Wahoo, Komoot, Strava or any other app that reads GPX.

How should I prepare for Shires and Spires?

Preparation for Shires and Spires should account for 10 km, 135 m of elevation gain, current training load, and available training time. An adaptive plan helps place key sessions without ignoring recovery and real life.

What pacing strategy works for Shires and Spires?

The pacing strategy for Shires and Spires should reflect 10 km, 135 m of elevation gain, and your current fitness. Start controlled and keep margin for sections where the profile or fatigue makes target pace harder.

When does Shires and Spires 2027 take place?

Shires and Spires 2027 takes place on May 9, 2027.

Where does Shires and Spires 2027 take place?

Shires and Spires 2027 takes place in Naseby, United Kingdom.

Which distances does Shires and Spires offer?

Shires and Spires offers 5 distances — 10K: 10 km; Half Marathon: 21.57 km; Three-Quarter Marathon: 30.74 km; Marathon: 42.84 km; Ultra Marathon: 56.33 km.

How do I register for Shires and Spires?

Registration runs through the organiser: gobeyondchallenge.com. YOUB shows you the course, elevation profile and training plan for your preparation.

More running races